Showing posts with label Structure 3d Sensor. Show all posts
Showing posts with label Structure 3d Sensor. Show all posts

Saturday 10 December 2016

Naked Connie: 3d modelling customized motorcycle bodywork

I've re-3d-scanned the stripped down ZG1000 Kawasaki Concours in order to better work out what the rear lights will look like.  You can wheel in and out and manipulate that model below with a mouse.  The scanner did a bunch of software updates which led to a much higher resolution 3d image.




I modelled it with the stock seat on with an eye to taking the pillion seat off and building a very minimal back end.  With some careful cutting I'll be able to use the seat dimensions to figure out how best to render the rear light assembly.  I've been doing 2-d drawings but they don't deal with the 3d complexities of the real thing.  I'm hoping this solves that.




Using the 3d scanner with cardboard body panel templates gives you a pretty good idea of how it will look when it's done.




As far as electronic parts go, I think it's time to get the lights sorted out.  At the moment I'm looking at some integrated LED head and tail lights to minimize stalks sticking out of the bodywork.

A single brake and indicator unit from Amazon.
Integrated LED headlamp from Amazon.


Sunday 2 October 2016

ZG1K: A Customized Kawasaki Concours

I've stripped down the Concours to the bare bones.  From there I intend to build it back out into a cafe-racer/naked streetfighter.  A barebones ZG1000 Concours looks pretty butch:




A high intensity LED headlight
with built in indicators.
ZG1K Stipped Model  -  Click on it and drag to change views
by timking17
on Sketchfab
The brown seat will sync with
a crimson stripe.  Were money
less of an issue I'd get it custom
upholstered to run the stripe all
the way through.
The back end is going to get tidied up and topped with a cafe style brown leather seat.  I'm also researching LED light systems that will be all but invisible under the seat until they light up.

The front end is going to get a basic/minimalist light cover and a light that has indicators built in for a clean look our front (no indicator storks poking out).  The front fairing and light will be mounted to the forks.


Stripping on the Ducati Monster is
a thing of beauty.
As for paint colours, I'd like to try and take the tank back to metal and then have a crimson stripe running over the minimal front fairing, along the tank and across the minimal rear body work.  An asymmetrical design with a thick centre strip and a thinner stripe off to the right is what I'm currently thinking, though I'll see what works as the bike comes back together.  If the tank is too rough I'll redo it red with a gold stripe that matches the wheels.  Now that I say that, it might be what happens anyway.


I'm going to use the Structure Sensor scans to map out body work in 3d.  I'm also going to make use of a Dremel 3d printer to print out scale replicas of different body configurations.  These are some screen grabs of the 3d scan (which you can see at the top).











The massive twin exhausts might get modified, but right now I'm enjoying the big-guns look they have, so I'll probably be keeping it.  They help visually balance a bike that looks otherwise top heavy with that massive gas tank.


First go at a logo - I think I'm going to have to find the Kawasaki Heavy Industries
logo for this heavyweight streetfighter.

Monday 11 April 2016

Tiger Tales in a Never Ending Winter

It's been an icy, crappy spring, but it looks like the end is nigh!
Tiger tales on a wintery April Weekend.  Last year at this time  Max and I were out doing a 300km+ run to Blue Mountain in some fresh Ontario spring air.  It was cold, and even flurried in places, but it was doable on dry roads with winter well behind us.

After another round of freezing rain last night we were up to ten degrees today.  Over the next few days it looks like riding season will start officially.  The Tiger is at my local mechanic getting saftied.  I should be on the road and ready to go by 
Wednesday, the day everything starts to get better.  In the meantime, while waiting for the ice age to end, I've been playing with some digital imaging:


Tigertester by timking17 on Sketchfab - a 3d model of the Tiger

Soon enough I'll be able to stop looking at it and starting to ride it!


Variations on a garage photo:




3d printed Triumph logo
I backed the Tiger out while trying to get the carbs sorted on the Concours - 2 hours later is was a white out out here.











3d printed Triumph logo

Triumph logo 3d printed

Dremel 3d printer doing the business
I scanned the Tiger with a Structure Sensor and then printed the 3d model on the Dremel 3d printer - not just a model
of a bike, but an exact scale model of my bike!


Wednesday 27 January 2016

Motorcycle 3d Modelling

I'm teaching a class on 3d modelling in Blender next semester, so what better way to practice than on my partially taken apart for maintenance ZG1000?



The model was made with the Occipital Structure Sensor 3d Scanner.  I'm trying different editing programs.  I used the 3d Builder integrated into Windows 10 to edit out the extra bits captured by the scanner.  It's quite easy to use and has some pretty good editing tools.  If you're trying 3d modelling for the first time it's not a bad place to start (and it's included in Windows 10!).

The file is shared on Sketchfab, which I find to be an easy way to do presentation editing and sharing of a 3d model.  We're using Blender in class, so I'll be cranking out some Blender motorcycle models in the next couple of weeks.  The trick is going to be to get them looking life like rather than digitally modelled.  I wonder how you model patina...











Saturday 28 November 2015

IIHTM: The Digital Workshop

If I had the money, what would the dream workshop look like?

I'm a computer tech teacher by day, and the 3d printer revolution is astonishing to behold.  The dream workshop would have the usual suspects (awesome tools etc), but it would also have some truly alien looking tech.

Ever seen a resin based 3d printer?  It's like something out of Terminator:



3d printing is about to get even wilder, with larger scale prints becoming an option.  Imagine a 3d printer that could handle motorcycle fairings... except you could do anything you want.  Want a fairing made out of dragon scales?  No problem!  Want customized etching across the entire fairing?  No problem!  Want to design a radical fairing using the stock mounting points?

Some time in Blender and you'll be ready to print radically customized fairings and other parts.



The BigRep1 goes for almost $40,000, but imagine what you could print in over a cubic meter of build space - motorcycle fairings would be not problem.  I think I'd rent one first to see what I could get away with before buying.

Using resin based printing instead of additive 3d printing means you can produce parts that have the same structural nature as cast pieces (they aren't made of bonded parts).  These pieces would be incredibly strong - they could also be made much more quickly.  Instead of hours long build times, we'd be looking at minutes...



If you're looking for futuristic workshop inspiration the Big Hero 6 garage would be a good place to start - in there he's 3d printing carbon fibre!  The holographic display is pretty dope too...



Iron Man is another film that gives you a good idea of what a 21st Century garage might look like.  Tony Stark's workshop is a holographic wonderland with built-in fabrication capabilities.



It was once thought that with fuel injection, onboard computers and digitization we would be losing the ability to modify and customize our motorbikes.  It turns out that digitization is actually handing the ability to manufacture back to individuals from the factories that took it from them.  Industrialization meant standardization and centralization in the 19th and 20th Centuries.  In the 21st Century manufacturing will return to the craftsmen it started with; localized micro-manufacturing is going to be the way of things to come.

If you're making shop space for yourself, having a computer in it gives you access to a world of information (I frequently use my to watch how-to videos and view schematics), but that workshop based computer is soon going to be providing a lot more than just information.  Do yourself a favour, get a handle on 3d modelling, it'll come in handy in the near future.

Ways to get started:
  • Get handy with Blender - it's free, and it's powerful!  There are also a lot of tutorials available for it online
  • Structure Sensor: a 3d scanner that snaps onto your ipad.  It makes making 3d copies a breeze!
  • Basic 3d printers start at about $1000.
  • If you want to give printing a try, many people in the maker movement offer 3d print services. It's a nice way to see what a 3d printer can do for you without the overhead... 3D Hubs is one such option, and they'll introduce you to makerspaces in your area.
  • Sketchfab is handy for sharing and doing light editing on 3d models.







Update:  Just saw this.  It'll print 18 x 18 x 24 inch pieces and is made by a Canadian company!  That'd do the business...