Showing posts with label Kawasaki Concours ZG1000. Show all posts
Showing posts with label Kawasaki Concours ZG1000. Show all posts

Saturday 10 December 2016

Naked Connie: 3d modelling customized motorcycle bodywork

I've re-3d-scanned the stripped down ZG1000 Kawasaki Concours in order to better work out what the rear lights will look like.  You can wheel in and out and manipulate that model below with a mouse.  The scanner did a bunch of software updates which led to a much higher resolution 3d image.




I modelled it with the stock seat on with an eye to taking the pillion seat off and building a very minimal back end.  With some careful cutting I'll be able to use the seat dimensions to figure out how best to render the rear light assembly.  I've been doing 2-d drawings but they don't deal with the 3d complexities of the real thing.  I'm hoping this solves that.




Using the 3d scanner with cardboard body panel templates gives you a pretty good idea of how it will look when it's done.




As far as electronic parts go, I think it's time to get the lights sorted out.  At the moment I'm looking at some integrated LED head and tail lights to minimize stalks sticking out of the bodywork.

A single brake and indicator unit from Amazon.
Integrated LED headlamp from Amazon.


Tuesday 4 October 2016

ZG1K: Customization, Inspiration & Aesthetics

Graphical thoughts on the ZG1K customization...

I'm still working through the proportions of a naked Concours.  It isn't a delicate device...

In spite of the colourful nature of the bike, it's a muscular heavyweight.
Inspirations for this build revolve around 80's sport bikes and naked streetfighters.  I grew up in the '80s and have a thing for fully faired race bikes with blocky rear ends.  The big, bulky Concours' tank lends itself to a strong, balanced back end.

A box shaped rear fairing working off and 80's race bike vibe combined with a minimalist cafe racer look



The paint's already coming off the tank.  I need to figure out how to make a rough 3d outline of the rear body work (cardboard, wood, thin metal?) in order to begin getting an accurate sense of how the back end will look.  If I can get handier with 3d editing software I'll 3d print a few various prototypes first (maybe scan it with cardboard panels in place).

The front fairing will be a minimal street-fighter type of thing.  I wanted to go with a bikini fairing, but it's a bit too delicate for the big shoulders of the Concours.  Monkeying around in Photoshop has gotten me this far:



But this is more of a sculpting thing than a pen and paper thing.  I need to make some cardboard outlines and see what feels right in 3d (Close Encounters style).

The Mike Tyson/heavyweight feel of the Concours means I'm thinking more melee fighter than I am lightweight and delicate.


Sunday 2 October 2016

ZG1K: A Customized Kawasaki Concours

I've stripped down the Concours to the bare bones.  From there I intend to build it back out into a cafe-racer/naked streetfighter.  A barebones ZG1000 Concours looks pretty butch:




A high intensity LED headlight
with built in indicators.
ZG1K Stipped Model  -  Click on it and drag to change views
by timking17
on Sketchfab
The brown seat will sync with
a crimson stripe.  Were money
less of an issue I'd get it custom
upholstered to run the stripe all
the way through.
The back end is going to get tidied up and topped with a cafe style brown leather seat.  I'm also researching LED light systems that will be all but invisible under the seat until they light up.

The front end is going to get a basic/minimalist light cover and a light that has indicators built in for a clean look our front (no indicator storks poking out).  The front fairing and light will be mounted to the forks.


Stripping on the Ducati Monster is
a thing of beauty.
As for paint colours, I'd like to try and take the tank back to metal and then have a crimson stripe running over the minimal front fairing, along the tank and across the minimal rear body work.  An asymmetrical design with a thick centre strip and a thinner stripe off to the right is what I'm currently thinking, though I'll see what works as the bike comes back together.  If the tank is too rough I'll redo it red with a gold stripe that matches the wheels.  Now that I say that, it might be what happens anyway.


I'm going to use the Structure Sensor scans to map out body work in 3d.  I'm also going to make use of a Dremel 3d printer to print out scale replicas of different body configurations.  These are some screen grabs of the 3d scan (which you can see at the top).











The massive twin exhausts might get modified, but right now I'm enjoying the big-guns look they have, so I'll probably be keeping it.  They help visually balance a bike that looks otherwise top heavy with that massive gas tank.


First go at a logo - I think I'm going to have to find the Kawasaki Heavy Industries
logo for this heavyweight streetfighter.

Monday 26 September 2016

Naked Connie

I put the Concours up for sale for a very reasonable $1200 and immediately got a bunch of low ball offers.  After a week of talking to cheap idiots I pulled it back off Kijiji, this bike deserves better than that.  I sympathize with people who can't afford the hobby, but I never agreed to support that charity.

Jeff's recent adventures with getting an old bike to modify into a cafe racer got me thinking about what a naked Concours might look like.  The ZG1000 is based on the Ninja sport bike (one of the reasons it's so agile), so as a donor bike it has a lot going for it.  I wasn't the first to wonder...


It shows how clean  you can make the engine and wiring without all the plastic covers, not radical enough though.

That's more like it!  The logo is a bit heavy handed though.  The rear seat frame is a bolt on piece.  Shortening the bike doesn't even require cutting.  The front end on this is also what I'm aiming for.


Love the paint on the gas tank.  It makes me look forward to stripping mine.  No airbox and exposed air filters are sweet.
Stripped down but looks half finished.


Front and rear fenders are sweet.  Suspended seat and tail look a bit awkward though.
I'm interested in a single seat saddle, not so much for a bobber look, but for a historical connection.

I stripped off the front fairings, mirrors and windshield.  That has to be about twenty pounds right there.  At the back I removed the pannier frames and the rear tail light assembly.  That'll be another easy ten pounds worth of odds and ends.  By the time I'm done, this bike will be an easy 100lbs lighter.

The entire rear frame that holds the panniers, seat and rear light assembly is bolted on under the seat.  Removing it seems pretty straightforward.  With the rear frame gone, the Concours starts to look more like a streetfighter than a sport tourer.  With the back end gone it was easy to remove the rear tire and get into the shaft drive which has been leaking.


While I was stripping things down I removed the bar risers, which lowered the controls a couple of inches and further lightened the bike.  With all the plastic and back end metal work off, the bike has already undergone a dramatic diet.  People tend to pick smaller, lighter bikes to cafe, but as I'm neither small nor light, the Concours makes for a big, muscly and quiet unique power cafe racer project.


With everything in the process of a strip down, I was easily able to get the back wheel off and uncover the shaft drive axle.  It's been leaking, but some research on CoG (the Concours Owners Group, which I just re-upped my membership on) suggested that a leaking shaft drive can be the result of over filling, which it was.  I'm going to clean it all up, fill it to spec and then keep an eye on it before I go all crazy tearing it down (which looks like a hassle because you've got to heat parts to get them apart).


I'm hanging on to the Concours because of some magic moments on it.  The sound of that engine at full song is exceptional.  The thought of giving it away after all the work done grates on my nerves as well, especially to some tool who is just looking for a handout (one guy, after trying to talk it down $500 then complained about the state of the fairing - screw him).  Had I sold the Connie I'd have gone looking for a bike I could strip down and customize.  Hanging on to the Concours means I'm doing that with a low mileage bike full of new parts.  One that I'm already really familiar with.

Since I'm not depending on the Concours to be my everything bike any more it can become a blank canvas, which is what I was looking for in the first place.  A stripped down, restyled Concours isn't going to be a Concours any more, but it is going to exploit that big Ninja engine and nimble handling it already had.  Best of all, I get to hang on to those fantastic gold rims, and build up a custom around them.  Much better that than my resurrected ZG1000 going to motorcycle welfare.


Even the instrument cowl is a big, heavy old thing.  I'm aiming for an analogue speedometer and then a
microprocessor controlled LCD screen.


Don't know if I'll keep the Ironman theme, but I might, it's eye catching.



Someone somewhere might be looking for just this thing!

All that weight hanging behind the rear wheel will be gone.  The Concours always felt frisky for a big
bike, I can't imagine what it'll feel like with all that weight gone.  A custom LED tail light in in the planning.

I'm going to take a note from Jeff and see if I can sell off parts others might need for their complete
Concours in order to help pay for the bits I need for mine.


Bar riser still on to the left, the one on the right is a couple of inches lower.
With the mystical, multi-talented Tiger on hand, the Concours can take its time becoming a specialist.
It seems happier with that prospect.  So am I.